How Do I Connect A VCR to My TV?

How Do I Connect A VCR to My TV?

Connecting a VCR may seem a little confusing or difficult if you've never done it. It's very simple though. In this reading, I hope to make you an expert at connecting your VCR.

What You'll Need To Have...

All you need is an AV(Audio Video) cable. Generally there are Red, White and Yellow for stereo sound. They are sometimes just white and yellow for mono sound. The difference is that with White AND Red, you get separate audio on the right and left side of your TV (this enhances the experience). With just White, you get the same audio on both sides.

You will also need the obvious, you're TV and VCR.

What You'll Need To Do...

Connect one end of the AV cable to the back of your VCR. Make sure you put it under AV out.

Audio Video Out On Back of JVC VCR Connection

Some VCRs have two rows of audio video ports just be sure to put it under AV out. Next, you'll connect the other end of the wiring to the back panel of your TV.

Back Panel Of TV With AV(Red White Yellow) Cables Connected

Now that you have it all wired up, you're going to set it to the correct input, and put your tape in. That's all you have to do, now you can watch your movies whenever you want. Comment below if you have any questions.

Previous article How to Record From Any Device Using a DVD Recorder
Next article Interested in Knowing How to Transfer VHS Tapes to Your Computer?